• dry deburring-finishing machine for metals

    m950 is the compact deburring-finishing machine designed to meet a variety of production
    requirements for diversified machining. The machine allows to better satisfy all dry deburring
    and satinising requirements of metallic surfaces thanks to the several customising machine
    compositions and the technical features of the working units.

    PHOTOCELLS WITH “PRESENCE DETECTION SYSTEM” TO ALWAYS ENSURE THE CORRECT CENTERING OF THE ABRASIVE BELT

    The system is managed by a very reliable and precise background suppression photocell.

    QUICK LOCKING SYSTEM QUICK ABRASIVE DISCS REPLACEMENT SYSTEM

    The quick disconnecting spindle system allows the operator to rapidly set the machine up for any kind of application, providing at the same time the maximum safety of the locking system.

    LONG BELTS: 2620 MM LENGTH FOR GREATER FINISHING AND PRODUCTIVITY

    Better cooling of the abrasive grit due to the greater development of the belts that reduces the adherence of dust. An extended belt length lasts longer, requires fewer replacements and consequently less downtime.

    dry deburring-finishing machine for metals

    R – contact roller unit

    The machine is available with “R” contact roller with large diameter (220 mm) in all working positions, to ensure a perfect deburring or satinising task:

    • Oil and heat resistant rubber coated roller (with hardness ratings from 20 to 90 Sh)
    • Wide possibility of vertical adjustment of the roller to equip the unit with very thick abrasive cloth belts.
    • Pneumatic ON/OFF to control work positioning
    • Oscillating cleaning blowers for the abrasive belt (option)

    DT – oscillating unit with vertical disc brushes

    The versatility of the “DT” unit allows a wide range of applications depending on the type of abrasive tool used (steel wires, nylon filaments, abrasive cloth strips supported by abrasive pad inserts, abrasive cloths and others) according to the technical features of the materials to be processed and the desired machining results. The oscillating movement, combined with the main motor high power controlled by inverter, allows to reach all the surfaces to be processed, even the most difficult points as in case of complex cuts, slots and holes in order to ensure a high finishing results on the workpiece.

    According to the tool used, you have the possibility to obtain:

    • Smoothing and rounding of sharp edges
    • Removal of burrs from holes
    • Removal of oxide from termal cut edges

    dry deburring-finishing machine for metals

    The complete range of working units along with advanced technological solutions make the
    m950 RDR machine extremely safe and simple to use.In a single pass through the machine, you
    have the possibility to:

    • eliminate large burrs from cutting
    • efficiently remove sharp edges while creating a radius
    • deburr and radius the edges of holes, even of a small diameter
    • efficiently remove oxide generated while cutting, whether on the external perimeter of a piece or from within a hole.
    • achieve different finishing effects

    The natural rubber mat with flat profile and high adhesion effect, together with the vacum feed table, allows the processing of small and thin workpieces.

    The machine infeed and outfeed roller conveyor, consisting of idle rollers closed to each other and
    made from steel grooved bars, allows to resist to oil corrosion and heavy workpiece loads.

    The complete range of outfeed optionals means that these machines can be customised to meet any cleaning and finishing requirements.

    HYDRA V-PAD

    The “Hydra V-Pad” control is used to control all the operating parameters via touch-screen and to check, in real time, the correct operation of the machine.

    DMC has developed a new compact and solid wet deburring-finishing machine. The m950 wet can be equipped with 1-6 working units.Those units available are Roller drums (R), Row of 6 Discs (D) and Oscillating barrel brush (B) with abrasive cloth. With the modular structure, it is possible to replace the single operating units or order the machine with empty spaces for the future working units. This feature makes the machine very flexible for future growth and production requirements.

    MAIN EQUIPMENT

    • Hydra V-pad control panel with 5.7” touch-screen (10.4” opt.) with 120 working programs
    • Air filtering unit on top to clean air containing oil mists (opt.)
    • Motors positioned inside the machine structure
    • Stainless steel tank
    • Drying station: parts exit the internal units and go through a cleaning and drying station (opt.)
    • Fast locking system of the working units
    • On/off positioning for the working units
    • Working unit motors are driven by inverters (opt.)
    • Infeed over thickness detection
    • External tank and particle collection equipped with automated “fabric/non-fabric” filter (opt)
    • Automatic feed belt tracking system

    GRIT-SET

    Electronic adjustment of the operating units. This is the best solution to ensure fast and precise positioning of the working units with reliability over time.

    STAINLESS STEEL TANK

    For long lasting performances in any working condition

    ABRASIVE BELT TRACKING SYSTEM

    Managed by a precise background suppression photo eye. A timed blower ensures the photo eye is clean and able to send signals at all times for optimal results.

    HYDRA V-PAD

    The “Hydra V-Pad” control is used to control all the operating parameters via touch-screen and to check, in real time, the correct operation of the machine.

    grit-set_vantaggio