• iron09
    Available in three different widths, the lines comprise a motorized decoiler coil-loading cradle, strip-end input unit, cutting head with guides, off cut rewinder, input table, felt or roller strip-tightening clamp for fragile metals, rewinder for cut coils with pressure arm take-off guide, offloading turret with two or four heads to facilitate strapping and removal of the cut coils by means of a ‘C’ hook.

    Three working speeds are available: 0 to 40 m/min., 0 to 50 m/min., 0 to 100 m/min. The cutting heads come in various grouped dimensions with 5, 10, 15 or 20 pairs of blades and are supplied with extractor rings and strip supports.

    They are available either with fixed or removable shafts to facilitate rapid replacement of the blades, gauged spacers and support and extractor rings. The line is run by a power electric box and electric console containing all the controls for manual and automatic functions.

    Cutting and rewinding speed is regulated by photocells located in the loop pit and by tachymeter’s with compensation circuit boards for variations in rewinding diameters.
    All functions are powered by a suitably rated Oleodynamic power pack. Cutting width precision is within a tolerance of± 0.5 of the setting.